← Table of contents
One Thousand Ways to Make a Living

PLAN No. 713. SHOWER BATH

Reading edition

A very simple, convenient and cheap arrangement for a home-made shower bath has been built by a woman. Take a 2-gallon tin bucket, punch a hole in the bottom of it, and solder in the opening a piece of metal piping 2 inches long. Attach to the pipe a 4-foot length of rubber tube, with a sprayer from a garden watering-pot on the end. Tie to the handle of the bucket a piece of rope and run the latter through a staple driven into a wall at a suitable height, thus making a pulley by which the bucket can be raised or lowered to meet the convenience of the person using the shower. Drive a hook below the staple so that the rope can be fastened to it to hold the bucket in place. A good-size wash tub placed beneath the bucket will serve for the person to stand in. To cut off the water a clothespin pinched on to the rubber tube will do. The cost of the shower bath will be as follows:

2-gallon tin bucket .50

12 feet of rope .07

Rubber tube and connections 1.50

Piping .10

Stock .10

Staple .10

1.87

Explore with AITake your curiosity a little further.

Reading settings