← Table of contents
Secrets of meat curing and sausage making

NEAT’S FOOT OIL. (Copyrighted; Reprint Forbidden.)

Reading edition

Neat’s Foot Oil is made by simply boiling the feet of cattle in a water bath, in an open kettle. The oil will come out of the feet and float on the top of the water. After the oil has been cooked out of the feet, they should be skimmed out of the kettle. The oil should then be treated with our Lard Purifier, the same way as directed for treating Lard. Simply let the water and fat cool down to 200 degrees Fahrenheit or below, and to every 100 lbs. of oil add about four ounces of our Lard Purifier dissolved in a quart of water. Stir the water, Lard Purifier and Neat’s Foot Oil thoroughly, and then start up the fire and bring it to a boil. Skim off any foam and impurities that may come to the surface and then stop the fire and allow it to settle about two hours; then skim the oil off of the top of the water and you will have genuine, sweet and refined Neat’s Foot Oil.

Explore with AITake your curiosity a little further.

Reading settings