ALPHABETICAL REFERENCES TO DRAWINGS.
Reading edition
A Main Driving Pulley, 16 in. dia. x 4-1/4 in. face; 5-1/4 in. face for Two-beater Machine.
A1 Beater Driving Pulley, 30 in. dia. x 4-1/4 in. face. for 18-in. Rigid Beater; 22 in. dia. x 4-1/4 in. face for Carding Beater.
B Beater Pulley, 9 in. dia. x 4-1/4 in. face (occasionally 10 in. dia.)
B1 Feed Pulley, 3 in. to 13 in. dia. x 2-1/4 in. face; advancing by 1/2 in. increments.
B2 Calender Section Fan Driving Pulley, 6 in. dia. x 2-1/4 in. face for 18-in. Rigid Beater, and 8 in. dia. x 2-1/4 in. face for Carding Beater.
B3 Calender Fan Pulley. 8 in. dia. x 2-1/4 in. face.
C Driving Pulley for Side Shaft, etc., 12 in. dia. x 2-1/4 in. face.
C1 Evener Cross Shaft Bevel Gear, 27 T.
C2 Evener Cross Shaft Change Gear, 55-35 T; diminishing by one tooth.
D Side Shaft Bevel Gear, Feed End, 27 T.
D1 Side Shaft Bevel Gear, Calender End, 18 T.
E Large Clutch Bevel Gear, 60 T.
E1 Small Clutch Gear, 17 T.
F Calender Cross Shaft Driven Gear, 96 T.
F1 Front Lap Calender Roll Driving Gear, 12 T.
F2 Calender Cross Shaft Gear, driving Calender Rolls, 14 T.
G Large Double Intermediate, driving Bottom Calender Roll, 50 T.
G1 Small Double Intermediate, driving Third Calender Roll 27 T.
G2 Bottom Calender Roll, 7 in. dia.
H 3d Calender Roll Gear, 21 T.
H1 3d Calendar Roll, 5-1/2 in. dia.
I 2d Calender Roll Gear, 22 T.
I1 2d Calender Roll, 5-1/2 in. dia.
J Top Calender Roll Gear, 23 T.
J1 Top Calender Roll, 5-1/2 in. dia.
K Top Stripping Roll Intermediate Gear, 17 T.
K1 Top Stripping Roll Intermediate Gear, 17 T.
L Top Stripping Roll Gear, 14 T.
{48}
M Bottom Stripping Roll Gear, 14 T.
M1 Bottom Cage Driving Gear, 23 T.
N Bottom Cage Intermediate Gear, 20 T.
O Bottom Cage Gear, 181 T.
O1 Top Cage Gear, 181 T.
P Bottom Cone Change Gear, 35-55 T; advancing by one tooth.
P1 Bottom Cone, driving Top Cone. Letters also represent diameters near the middle of Cones.
Q Top Cone.
Q1 Worm Shaft Driving Spiral Gear, 9 T.
R Worm Shaft Spiral Gear, 9 T.
R1 Worm Shaft Worm, double threaded, right hand; equivalent to Gear having two teeth.
S Worm Gear, 78 T.
S1 Feed Roll and Apron Roll Driving Gear, 12 T.
T Feed Roll, 3 in. dia.
T1 Feed Roll Gear, 24 T.
U Apron Roll Gear, 29 T.
V Front Lap Calender Roll, 9 in. dia.
V1 Front Lap Calendar Roll Gear, 53 T.
V2 Back Lap Calendar Roll Driving Gear, 24 T.
W Back Lap Calender Roll Intermediate Gear, 22 T.
X Back Lap Calender Roll Gear, 24 T.
X1 Back Lap Calender Roll, 9 in. dia.
{49}