Note 13 — Products of Industry

The web is kept stretched by means of a strap or belt, which attaches to the near roller and then passes around the waist of the operator, who sits on the floor with her feet against a bamboo brace.13 The arrangement of the lease rod and heddle sticks has been already described; in addition to these the threads are further controlled by a reed board which acts both as warp spacer and beater-in. All being ready for the weaving, the shed is opened by raising one of the heddle sticks, and a heavy knife-shaped batten of wood is slipped into the opening. This is turned sideways to enlarge the shed, and a shuttle bearing the weft thread is shot through. By raising and lowering the heddle rods the position of the warp is changed as desired, while from time to time the weft threads are forced up against the fabric by means of the reed board, and are beaten in with the batten. Tangling is prevented by means of several flat sticks which cross the warp at some distance from the operator; while threads which show signs of loosening are carefully rubbed with a waxed stick.