Note 15 — Chapter XVI · ZINC, CADMIUM, AND MERCURY

Mercury may sometimes be obtained in a perfectly pure state from works (in iron bottles holding about 35 kilos), but after being used in laboratories (for baths, calibration, &c.) it contains impurities. It may be purified mechanically in the following way: a paper filter with a fine hole (pricked with a needle) is placed in a glass funnel and mercury is poured into it, which slowly trickles through the hole, leaving the impurities upon the filter. Sometimes it is squeezed through chamois leather or through a block of wood (as in the well-known experiment with the air-pump). It may be purified from many metals by contact with dilute nitric acid, if small drops of mercury are allowed to pass through a long column of it (from the fine end of a funnel); or by shaking it up with sulphuric acid in air. Mercury may be purified by the action of an electric current, if it be covered with a solution of HgNO3. But the complete purification of mercury for barometers and thermometers can only be attained by distillation, best in a vacuum (the vapour-tension of mercury is given in Chapter II., Note 27). For this purpose Weinhold's apparatus is most often used. The principle of this apparatus is very ingenious, the distillation being effected in a Torricellian vacuum continuously supplied with fresh mercury, whilst the condensed mercury is continuously removed. This process of distillation requires very little attention, and gives about one kilo of pure mercury per hour.