Note 25 tri — Chapter XXIV · COPPER, SILVER, AND GOLD

Silver cyanide, AgCN, is closely analogous to the haloid salts of silver. It is obtained, in similar manner to silver chloride, by the addition of potassium cyanide to silver nitrate. A white precipitate is then formed, which is almost insoluble in boiling water. It is also, like silver chloride, insoluble in dilute acids. However, it is dissolved when heated with nitric acid, and both hydriodic and hydrochloric acids act on it, converting it into silver chloride and iodide. Alkalis, however, do not act on silver cyanide, although they act on the other haloid salts of silver. Ammonia and solutions of the cyanides of the alkali metals dissolve silver cyanide, as they do the chloride. In the latter case double cyanides are formed—for example, KAgC2N2. This salt is obtained in a crystalline state on evaporating a solution of silver cyanide in potassium cyanide. It is much more stable than silver cyanide itself. It has a neutral reaction, does not change in the air, and does not smell of hydrocyanic acid. Many acids, in acting on a solution of this double salt, precipitate the insoluble silver cyanide. Metallic silver dissolves in a solution of potassium cyanide in the presence of air, with formation of the same double salt and potassium hydroxide, and when silver chloride dissolves in potassium cyanide it forms potassium chloride, besides the salt KAgC2N2. This double salt of silver is used in silver plating. For this purpose potassium cyanide is added to its solution, as otherwise silver cyanide, and not metallic silver, is deposited by the electric current. If two electrodes—one positive (silver) and the other negative (copper)—be immersed in such a solution, silver will be deposited upon the latter, and the silver of the positive electrode will be dissolved by the liquid, which will thus preserve the same amount of metal in solution as it originally contained. If instead of the negative electrode a copper object be taken, well cleaned from all dirt, the silver will be deposited in an even coating; this, indeed, forms the mode of silver plating by the wet method, which is most often used in practice. A solution of one part of silver nitrate in 30 to 50 parts of water, and mixed with a sufficient quantity of a solution of potassium cyanide to redissolve the precipitate of silver cyanide formed, gives a dull coating of silver, but if twice as much water be used the same mixture gives a bright coating.

Silver plating in the wet way has now replaced to a considerable extent the old process of dry silvering, because this process, which consists in dissolving silver in mercury and applying the amalgam to the surface of the objects, and then vaporising the mercury, offers the great disadvantage of the poisonous mercury fumes. Besides these, there is another method of silver plating, based on the direct displacement of silver from its salts by other metals—for example, by copper. The copper reduces the silver from its compounds, and the silver separated is deposited upon the copper. Thus a solution of silver chloride in sodium thiosulphate deposits a coating of silver upon a strip of copper immersed in it. It is best for this purpose to take pure silver sulphite. This is prepared by mixing a solution of silver nitrate with an excess of ammonia, and adding a saturated solution of sodium sulphite and then alcohol, which precipitates silver sulphite from the solution. The latter and its solutions are very easily decomposed by copper. Metallic iron produces the same decomposition, and iron and steel articles may be very readily silver-plated by means of the thiosulphate solution of silver chloride. Indeed, copper and similar metals may even be silver-plated by means of silver chloride; if the chloride of silver, with a small amount of acid, be rubbed upon the surface of the copper, the latter becomes covered with a coating of silver, which it has reduced.

Silver plating is not only applicable to metallic objects, but also to glass, china, &c. Glass is silvered for various purposes—for example, glass globes silvered internally are used for ornamentation, and have a mirrored surface. Common looking-glass silvered upon one side forms a mirror which is better than the ordinary mercury mirrors, owing to the truer colours of the image due to the whiteness of the silver. For optical instruments—for example, telescopes—concave mirrors are now made of silvered glass, which has first been ground and polished into the required form. The silvering of glass is based on the fact that silver which is reduced from certain solutions deposits itself uniformly in a perfectly homogeneous and continuous but very thin layer, forming a bright reflecting surface. Certain organic substances have the property of reducing silver in this form. The best known among these are certain aldehydes—for instance, ordinary acetaldehyde, C₂H₄O, which easily oxidises in the air and forms acetic acid, C₂H₄O₂. This oxidation also easily takes place at the expense of silver oxide, when a certain amount of ammonia is added to the mixture. The oxide of silver gives up its oxygen to the aldehyde, and the silver reduced from it is deposited in a metallic state in a uniform bright coating. The same action is produced by certain saccharine substances and certain organic acids, such as tartaric acid, &c.