Note 15 — PART I SPECIFICATIONS FOR STREET ROADWAY PAVEMENTS

There has been much discussion as to the suitableness of these oil asphalts, called “residual pitches,” for use in making asphalt pavements. When properly prepared from suitable asphaltic oils, so as to comply with the specifications here given, there can be no doubt that good pavements can be made with them. But as they appear on the market, being usually produced at different localities and refineries from crude oils of differing qualities, distilled by somewhat differing methods, and usually at temperatures of from 900 degrees to 1200 degrees, they are likely to vary so greatly in quality as to make their use inadvisable without careful technical inspection. Unless, therefore, the engineer is prepared to make, or to have such inspection made, it is hardly wise or safe to permit their use. They stand, in this respect, upon a footing different from the better-known natural asphalts obtained from large deposits of practically uniform character and quality, where the simpler process of refining is less likely to effect injuriously the chemical quality of the material.

It may be confidently predicted that any of these “residual pitches” which comply with these specifications will, if properly handled, make a good pavement.